Commissioning

What are you looking for?

Swedish market: The cooker comes with a 1 year warranty. To activate a second year warranty, a completed test protocol MUST be sent to Getinge Storkök after completing the commissioning process as described below. See the installation chapter in the user manual for more information regarding installation.

Data on the machine
Nameplate unit number*

Read the "Unit number" on the cooker's nameplate, which is located on the back of the cooker under the safety valve.
Upload image of nameplate
Accepted file types: jpg, jpeg, png, gif.
NOTE! Does not work with high efficiency image (HEIF) from Apple. Settings -> Camera -> Format -> select "Most compatible"
Stew version*
Select which version of tilting kettle. Read the fifth digit of the unit number 1=Mini 2=Bas 3=Midi 4=Maxi 5=Maxi IWC 6=Bas+ or see the name on the delivery note.
Data on end users
Facility name*
Name
First name Surname
Address
Street Zip code City Country
Telephone
Email
Data on dealers
Retailers*
Name
First name Surname
Telephone
Email
Installation
Location of the pot*
- OK
- Deviation
Position of the pot in relation to the floor drain
Message
Pillars standing in a wave*
- OK
- Deviation
(use a spirit level)
Message
Permanently mounted*
- OK
- Deviation
The pot is fixed to the ground or the stand is fixed.
Message
Water connection*
- OK
- Deviation
Message
Install the shower hose/shower gun if necessary*
- OK
- Deviation
check that there is no leakage
Message
Electrical connection*
- OK
- Deviation
Message
Turning on circuit breakers and main switches*
- OK
- Deviation
All automatic fuses are located at the rear inside the engineering column.
Message
That the cauldron is on a scale*
- OK
- Deviation
(use a spirit level)
Message
Position of the lid*
- OK
- Deviation
The position of the lid in relation to the pot. NOTE! The lid is adjusted at the factory - adjust the position using the pot's columns!
Message
Landfill
Check the stealing*
- OK
- Deviation
Check that there are no "gaps" between the pot's spigot and the bearing in the column during any part of the tilt and that the pot moves freely backwards.
Message
Check that the end position switch for "pot fully stalled"*
- OK
- Deviation
is correctly adjusted. Fill 5 liters of water when the pot is in normal mode. Then tip the pot's vessel to the maximum and check that the water measurement is reset to zero
Message
Boiling/leakage test
Start cooking*
- OK
- Deviation
check that the automatic mantle filling starts, then that the cooking process starts.
Message
Allow the pot to come up to working pressure (120°C, 1bar).*
- OK
- Deviation
check all connections for leakage
Message
Pressure test the pot*
- OK
- Deviation
according to the service manual chapter 6.3
Message
Steal the cooking pot*
- OK
- Deviation
check that the "pot stuck" limit switch for the pot stops the cooking process.
Message
Agitator on M5 BAS, MIDI and MAXI
Install the stirring tool and make sure it fits.
- OK
- Deviation
check that the tool runs freely
Message
Start the stirrer
- OK
- Deviation
Add 5 liters of water beforehand to cover the mechanical seal.
Message
Put the lid on and increase the speed to 80 RPM.
- OK
- Deviation
check that the lid limit switch breaks when the lid is opened 5cm measured at the front edge.
Message
Cooling on M5 MIDI and MAXI
Start the cooling function
- OK
- Deviation
check that the cooling process starts and that there is no leakage
Message
Dishwashing program when dishwashing tools are provided
Installing the dishwashing tool
- OK
- Deviation
check that it fits. Start the washing program and select "fast" washing. Check that the dishwashing water does not leak out between the container and the lid, if this occurs, the "dishwashing volume" should be reduced in the parameter list.
Message
Foot pedal if foot pedal is fitted (optional)
Check the function
- OK
- Deviation
see chapter 3.5.8
Message
Final check on all versions
Install all covers and plates*
- OK
- Deviation
Message
Wipe the pot clean*
- OK
- Deviation
For glue residues use e.g. citrus-based detergent or glue remover.
Message
All accessories*
- OK
- Deviation
specified on the delivery note are delivered
Message
Other remarks
Upload a picture of the remarks if possible
Accepted file types: jpg, jpeg, png, gif.
NOTE! Does not work with high efficiency image (HEIF) from Apple. Settings -> Camera -> Format -> select "Most compatible"
Date*
DD slash MM slash YYYYY
Commissioning carried out by*
Commissioning carried out by*
Telephone
Email
The customer's representative
First name Surname
Email
This field is used for validation purposes and shall be left unchanged.

Problem? We'll solve it!

Support
+46 (0)35-17 99 90
info@gsab.nu

Support
+46 (0)35-17 99 90
info@gsab.nu

Shopping basket

Shopping basket

Shopping basket

Data on the machine

Data on end users

Data on dealers

Installation

Landfill

Boiling/leakage test

Agitator on M5 BAS, MIDI and MAXI

Cooling on M5 MIDI and MAXI

Dishwashing program when dishwashing tools are provided

Foot pedal if foot pedal is fitted (optional)

Final check on all versions

Problem? We'll solve it!

Support

Support