M5 BL Bas

A new generation of tilting kettles

Our new M5 tilting kettles has a new control panel in the form of a graphic touchscreen that provides a clear overview and is easy to use. It is also possible to control multiple functions at the same time.

Volume : 50 L
Clear
Make the request
Article no.: M5 BL Bas 600mm Category:
CONSTRUCTION

600mm tipping height.
Bolt-Less installation. M5BL is completely freestanding on legs and does not need to be bolted to the floor. No drilling that could damage the floor waterproofing is required during installation.
Technical design according to SS-EN 13886.
The cooker is of stainless steel construction with a fully welded, acid-proof stainless steel pot.
Hygienic design with a minimum of components on the outside of the cooking pot.
Well insulated pot for good stability, low external temperature and high energy efficiency.
The pressure vessel is designed so that the heating elements are submerged regardless of the position of the vessel. No dry cooking is possible.
Automatic water filling of the steam jacket.
Wide heavy-duty lip on the pot minimises spillage and ensures that the silver plate does not fail.
All equipment required to operate the tilting kettle and stirrer is located in the right-hand column of the pot.
Very easy service access via the cooking pot pillar with only one lock per service hatch.
Power switch for electrical connection integrated in the right-hand pillar of the cooking pot.
Water connections equipped with pre-closing valves and back suction protection type EB according to SS-EN 1717.
The cooker can be adapted at the factory for electrical and water connection from the wall/installation duct or from the ceiling. Low-flow filters for stirrer operation as standard allow connection to earth leakage circuit breakers for personal protection. Electrical connection for Cu cable only. If Al cable is to be used, an adapter is required. Enclosure class IPX5.

LOCK

Spring-balanced plastic hinged lid with integrated inspection grille. The insulating properties of the material result in over 20% lower surface temperature than a stainless steel lid at normal operating and ambient temperatures, thereby reducing the energy consumption of the cooker.
The insulating plastic lid significantly reduces the risk of burns and saves energy compared to a stainless steel lid.
Plastic lids provide a good working environment with more than 20dB (A) lower noise level than a stainless steel lid. The noise level of a plastic cover is well below the Occupational Health and Safety Agency's limit values, unlike a stainless steel cover.
Lid for inspection grille.
The lid can be rotated around its axis, which provides an ergonomic working position and a minimum of spillage/splashing during cleaning.
LED lighting in the lid for perfect visibility through the inspection grid when the lid is on.

GOVERNANCE, GENERAL

Electronic control with graphic touch screen for a clear overview and easy operation.
Additional control panel with buttons allowing simultaneous operation of steering, stirring and water filling regardless of the menu displayed on the touch screen.
Ergonomically positioned control panel.
Integrated web server. Access from a web browser via the local network.
All settings can be made via the local network if required.

COOKING

Electronically controlled boiling function with dual power stages and advanced temperature measurement with very high accuracy.
The cooking function can be programmed for automatic activation of the heat-holding function after a set time and for delayed start at a specific time.
93-95% efficiency depending on pot size measured according to EFCEM standard.
Energy measurement via e-log. Energy consumption is summed up locally in the cooker electronics and can be displayed on the touch screen.

WATER FILLING, TILTING KETTLE

Fully automatic water filling with flow measurement in decilitre resolution.
Water-pip placed on the tilting kettle, under the lid for best hygiene.
Manually controlled water filling possible at any time via button on control panel.

STIRING

Bottom stirrer that can make mashed potatoes from 100% filled casserole. Speed 5-155 rpm. 6 preset programs with different stirring patterns and acceleration times allow for everything from very gentle stirring of delicate products to vigorous stirring and whisking. All with one stirring tool. The stirrer can be programmed to stop after a certain time as well as programmed for a delayed start at a certain time.
Short stirring shaft to facilitate manual mixing and cleaning of the pot. Lightweight stirring tool for good ergonomics. Quiet stirrer. Less than 60dB (A) in normal operation. Continuous independent monitoring of stirrer speed provides high safety as standard.

See all M5 tilting kettle

 

 

 

Read more

    Download

  • Product data sheet EN

    272 KB
  • Product data sheet EN

    269 KB
  • Product data sheet SE

    273 KB

Many possibilities

Accessories for a simpler everyday life

What version of the M5 do you need?

MiniBasBas+MidiMaxiMaxi/IWC
Flow measurement
Boiling
Time management
Stirring
ACTOptionalOptionalOptionalOptionalOptional
Cooling
Fermentation
Programming
Core temperature
Diagnostic system
Cook & Chill
gs-doc™OptionalOptional
e-log™OptionalOptionalOptionalOptionalOptionalOptional
LED lighting in the lid
  • Tilting kettles for commercial kitchens from Getinge Storkök

    Training included

    Although a Getinge Storkök tilting kettle is easy to use, it always includes training on how to use it to its full potential. You will be visited by one of our chefs who will walk you through its use and teach you all the tricks and subtleties.

  • Tilting kettles for commercial kitchens from Getinge Storkök

    tilting kettle that can handle more

    Most of our technology development is about making the cooking pot capable of performing more tasks with less manual effort. There's a lot to be gained by choosing a tilting kettle that can cook, mash, whisk and chill food. Not to mention how great it is that it washes itself when the food is on the table.

  • Tilting kettles for commercial kitchens from Getinge Storkök

    tilting kettle adapted to the kitchen

    When a kitchen is to be rebuilt, certain frameworks and conditions are difficult to change. Getinge Storkök, together with its dealers, offers great opportunities for customisation.